Welcome to WIFI Antennas
Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
Admin
Administrators-
Content count
4637 -
Joined
-
Last visited
Everything posted by Admin
-
After several attempts with different antenna variants, I've come to that....MiMo Panel Antenna But it must to be optimized...!!!
-
,,,good, now I'm working on this antenna ....!!!
-
I will try to do this simulation...!!!
-
,,,okay....!!!!
-
,,,the thickness of PCB....??
-
,,, and the thickness and distance from the reflector...!!!
-
For such frequencies, the material from which the PCB is built, matters a lot...!!!
-
The 60 GHz-band antennas are not possible for an amateur...!!! http://wlan.am/en/point-to-point/176-wireless-wire-dish.html
-
A highly directional antenna, even at 60 GHz it is not problematic to do, because the focus and aperture is related mathematically through the square of the wavelength. A = D / lambda^2 / 4 / Pi A=aperture efficiencies D=diameter of parabola In terms of the parabolic mirror with the efficiency of the use of the aperture efficiencies 60% (very good feed) Aperture efficiencies of typical antennas vary from 0.35 to 0.70 but can range up to 0.90. Dimensions of above parabola Ø 391 x 222 mm
-
,,,good, I think this would work ...
-
,,,the antenna can not be so small ... how can it be PCB = 1,5x14x46mm ???
-
-
,,,and some construction details...
-
,,,good, if you want, you can post....!!!
-
,,,this is all you want ... !!!
-
,,,,and here is a plagiarist who has never brought any of his own ideas....!!!! https://ypylypenko.livejournal.com/58387.html
-
,,,for which the antenna is working on the band 5-5,35GHz ... ???
-
,,,for this antenna can you give these dimensions? ... ???
-
There's no problem, I'll try to solve it...!!!
-
,,,this is your job, I do not work for others...!!!
-
The feed point must be at 0 point...!!!
-
-
,,,which are the basic data of your BS(Base Station)...???
-
,,, then why is this antenna built... ???
-
,,,, you have to use both ports ... !!!!
