Welcome to WIFI Antennas
Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
Admin
Administrators-
Content count
4637 -
Joined
-
Last visited
Everything posted by Admin
-
,,,Acri.DC13th. please, speak on english...!!!
-
very suitable for RTRWNet to scale 3km to the bottom with the note depending on the field conditions or the air the area of each size 250 mm * 55 mm * 90 mm Firmware use SuperWRT CPE 5.8 ghz is suitable to the client/bridge/CPE QCA AR9344 dual 533MHz DDR2 64MB 23dBm flash 8MB poe adapter 24V 500mA 400mW mimo 300mbps 14dBi
-
wings=1x90x900mm reflector-1,5x75x900mm angle of opening = 19 ,,,, 33grd+90grd
-
Bejo, yes I know it....!!! But can you still show where you found that...???!!!
-
DC13th,tell me, the vibrators are 16x16mm and the directors have the same size at the 2.5mm height in the air...???
-
,,, DC13th, send to me and the *igs file with the 8 directors...!!!
-
I'll try and put the directors to see how it works ...!!!!
-
Yes, I think it is good antenna, but for 5,7ghz and without directors
-
,,,please,give me *igs file or *sat file....!!!
-
,,, hey buddy, why do not you try to study this post...???
-
-
I was almost sure of this, but it can not be in that way...~!!! ,,,only this copper part has to appear...
-
good, but how did you configure this on cst...??
-
This antenna is designed for use on mobile and stationary objects. Antenna works with any devices in the range of 790÷960/1700÷2700 MHz (USB modems, repeaters, amplifiers, etc.). Thanks to a wide band antenna capable of operating in the most skorostnyh the mobile communication standards, with a maximum Internet speed up to 300 MB/s For the implementation of the MIMO mode, it is recommended to use two such antennas. Light weight, great aerodynamic shape and use of rare earth magnets in the magnetic system allow to keep the antenna on the roof of the car at speeds above 150 km/h! The electrical characteristics of the antenna Magnita-1 Operating frequency range, MHz 790-960/1700÷2700 Gain (excluding cable loss, when placing the antenna on the roof of the car), dBi 2÷4 / 6.0÷7.0 Gain (excluding cable loss, when placing the antenna in free space), dBi Of 2.0÷3.0 The width of the days in H-plane, degrees 360 Days width in E-plane 3dB hail 15÷45 The elevation angle of the main maximum of the radiation pattern when placing the antenna on the car roof, C 5÷25 Input impedance, Ohm 50 SWR in the frequency range, not more 1,6 Permissible power watts 10 Polarization vertical The mechanical characteristics of the antenna Magnita-1 Weight with cable g 240 Dimensions without cable, m 0,10 x 0,10 x 0,08 The force of attraction of the magnetic system (when the thickness of the metal roof of the car - 0.7 mm), N 50÷55 Connector SMA-male / on-demand The material of the radiator tin tin Material samango casing ABS + polycarbonate
-
,,,, if you have the cst file why do not you do a simulation with the program...!!??? ,,,thanks dude,good, but you can extract to me from *cst file, *sat file or *igs file ,only for metallic copper part...???
-
-
-
,,, that's not good antenna ...!!!
-
okay, thank you..!!!
-
,,, what is the PCB thickness .. ??? ,,, you can give me the antenna in one of these formats, to be able to transform it into cst * ,,,*cdr ,and *dxf don"t work in cst simulator...!!!!
-
,,,wow dude, where did you get that, you got the original?
-
-
-
,,, incomplete drawing, missing dimensions....!!!!
-
"maybe, I do not know, give me the sizes...!!
