Welcome to WIFI Antennas
Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
Admin
Administrators-
Content count
4764 -
Joined
-
Last visited
Everything posted by Admin
-
Yes, it goes with 1.5mm,but I think a simulation needs to be done...!!! And yet, not everything that flies, is eating...!!!
-
-
", it might work !!!
-
,,,well, but the gain in directivity is too low...!!!!
-
-
,,,no,like this...
-
,, and for those interested in executing this panel antenna, I present below the necessary data..
-
The design of new UWB antenna faces some challenges. The antenna should be compact, preferably conformal, low cost for manufacture, and have good electrical performance, such as good matching, directional radiation performance over a wide band, good time response, etc. Keeping these goals in mind a compact and directional Panel Antenna was built. The antenna radiating structure is in the form of four exponentially tapered arms that lie on the opposite sides of the substrate. The antenna operates over the frequency band from 1,2 GHz to more than 1,9 GHz. It exhibits a directive radiation performance with a peak gain which is between 13.2dBi and 15.2dBi in the specified band. The time domain performance of the antenna shows negligible distortion of the pulse which makes it suitable to use with impulse based on WiFi.
-
" yes, 3 antennas spaced at 56mm and get this gain in directivity...
-
,,, the port with SMA2 is good....
-
this is good?
-
PCB FR4 #1mm...??
-
buddy, the antenna also has directors ,,, ?? which is the distance from the reflector? what PCB does it have?
-
,,,Acri.DC13th. please, speak on english...!!!
-
very suitable for RTRWNet to scale 3km to the bottom with the note depending on the field conditions or the air the area of each size 250 mm * 55 mm * 90 mm Firmware use SuperWRT CPE 5.8 ghz is suitable to the client/bridge/CPE QCA AR9344 dual 533MHz DDR2 64MB 23dBm flash 8MB poe adapter 24V 500mA 400mW mimo 300mbps 14dBi
-
wings=1x90x900mm reflector-1,5x75x900mm angle of opening = 19 ,,,, 33grd+90grd
-
Bejo, yes I know it....!!! But can you still show where you found that...???!!!
-
DC13th,tell me, the vibrators are 16x16mm and the directors have the same size at the 2.5mm height in the air...???
-
,,, DC13th, send to me and the *igs file with the 8 directors...!!!
-
I'll try and put the directors to see how it works ...!!!!
-
Yes, I think it is good antenna, but for 5,7ghz and without directors
-
,,,please,give me *igs file or *sat file....!!!
-
,,, hey buddy, why do not you try to study this post...???
-
-
I was almost sure of this, but it can not be in that way...~!!! ,,,only this copper part has to appear...
