Welcome to WIFI Antennas
Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
Admin
Administrators-
Content count
4637 -
Joined
-
Last visited
Everything posted by Admin
-
Irg, I do not have the original size, but I will try ... !!!
-
,,, with a few modifications...
-
BOF 3G,....
-
This elliptical patch antenna is often built of printed circuit board material and the substrate makes up the patch antenna’s dielectric In general, however, the figure that the electric field traces is an ellipse, and the field is said to be ... – Large size at low frequency. – Antenna performance and tuning affected by the PCB design. ,,, and by adding a reflector...
-
-
Irradiator AX-2600 OFFSET 2x2 MIMO in the set with offset mirror antenna (not included) designed to increase range of 4G modems the range of 2.5-2.7 GHz . Mirror antenna with feed significantly improves the quality of communication at the boundaries of the service area operators 4G. . Antenna connector with short circuit DC current between the outer and inner conductors.The irradiator has two inputs, corresponding to orthogonal polarizations of the radiated signal. The original design of the antenna feed provides high isolation between inputs in a wide frequency band.
-
Irg,,,this works too...!!! with few changes..!!!
-
,,,okay, but this can be done only with the laser cut machine ...!!!
-
But in all that, the corners must be rounded...
-
RHCP
-
Increasing the gain in directivity of the antenna...
-
But anyway, Ivan is smart .. !!!
-
This is the original antenna...
-
,,,but the simplest would be like that...
-
"I think this is how the power lines of the two antennas (one with horizontal polarization, the other with vertical polarization) ...
-
Through this configuration, I managed to get s12, s21 << 26dB...
-
,,,yes...!!! Cu Wire 1,5mm diameter
-
That's what it looks like...
-
No, I will try to make for you such an antenna in the air of copper wire and galvanized sheet. I think using PCB, can lead to a worsening of the antenna performance...!!!
-
Let's see, I do not know if I have this file..!!
-
,,,,802.11 ac is the new IEEE standard. Data transfer rate — up to 6,77 Gbps for devices with 8 antennas.
-
I started...!!! Lonely Angel,you can make something like this...???
-
,,,alternating current(AC) is not the same as electromagnetic current(EMC)...!!!
-
For now I have not started working on this type of antenna...!!!
-
Broadband 2G/3G/WiFi/4G MIMO antenna 15 dB KAA15-750/2900 Supports LTE-A (advanced) Broadband MIMO antenna LTE800/GSM900/GSM1800/LTE1800/UMTS900/UMTS2100/WiFi/LTE2600. Gain from 10 dB (LTE800) to 15 dB (LTE2600)
