Welcome to WIFI Antennas
Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
Admin
Administrators-
Content count
4764 -
Joined
-
Last visited
Everything posted by Admin
-
,,, for those interested, I present below the constructive dimensions of this antenna panel... ,,,that's how a box cover is cut out...
-
"Yes, of course, these lids of liver pudding boxes are formidable.....!!!! Powerful 3G and 4G panel antenna for receiving the weak of the Internet on a smartphone Thanks shown to the idea now you can build your own simple, but extremely powerful antenna for its size, which can stably make a weak Internet signals 3G and 4G on your mobile phone or tablet. This panel is workable even when the other antenna is inefficient.
-
,,,or DB pure increased patch...
-
Irg, see the above image, Google Earth...!!!
-
Two antennas of this type...
-
,,, a new version of the patch-yagi antenna...
-
But in all of this, is the antenna calculated for the 850MHz frequency...??? ,,,and it is advisable to use two SiSo antennas instead of a single MiMo antenna...!!!
-
"Irg, I will soon adapt the antenna for this frequency....!!!!
-
Here are the dimensions posted by user Chilanzar2, for the 1.8GHz frequency... and the simulation of this antenna...
-
This is your modem ... ,,,in which frequency band you work with him....??? DC-HSPA+/HSPA+/HSPA/WCDMA: B1/B8...????
-
"okay, I agree with you, but you have to know that the antenna is not good enough ....!!! Look at this...
-
,,,well Irg, but for which frequency do you want...!!!
-
I'm trying to look for a simple dual-band ,4-patches antenna panel...!!!!
-
Irg, I do not have the original size, but I will try ... !!!
-
,,, with a few modifications...
-
BOF 3G,....
-
This elliptical patch antenna is often built of printed circuit board material and the substrate makes up the patch antenna’s dielectric In general, however, the figure that the electric field traces is an ellipse, and the field is said to be ... – Large size at low frequency. – Antenna performance and tuning affected by the PCB design. ,,, and by adding a reflector...
-
-
Irradiator AX-2600 OFFSET 2x2 MIMO in the set with offset mirror antenna (not included) designed to increase range of 4G modems the range of 2.5-2.7 GHz . Mirror antenna with feed significantly improves the quality of communication at the boundaries of the service area operators 4G. . Antenna connector with short circuit DC current between the outer and inner conductors.The irradiator has two inputs, corresponding to orthogonal polarizations of the radiated signal. The original design of the antenna feed provides high isolation between inputs in a wide frequency band.
-
Irg,,,this works too...!!! with few changes..!!!
-
,,,okay, but this can be done only with the laser cut machine ...!!!
-
But in all that, the corners must be rounded...
-
RHCP
-
Increasing the gain in directivity of the antenna...
-
But anyway, Ivan is smart .. !!!
