Welcome to WIFI Antennas
Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
Admin
Administrators-
Content count
4992 -
Joined
-
Last visited
Everything posted by Admin
-
Antenna Nova 433МHz out the window 1) name the type of cardioid. To the wall or window to hang. 2) At-3dB level, the angle of the horizon 90...130° 3) vertically pressed to the ground.. 4), the bar 30...60 MHz for reception. On the transmission...420 446 with an acceptable SWR.
-
Yagi UHF 433MHz 5el 10 dBi overview And an antenna with 4 stack set on the vertical plane,20el-16dBi sketch insulateed thru square boomm small
-
And these are the files for PCB printing MYPCB.dxf MYPCB.frw With some technical details,,,
-
,,, and for that, I decided to modify it MiMo the antenna on PCB, below I present a simulation with this antenna which has a good isolated ports,
-
But I think that this antenna is more efficient...
-
I tried to check this antenna and here are the results These are the results for the original dimensions. And these are the results after changing the size of the patch The enclosed dimensions are valid
-
And a variant of the antenna with flat-band brass... http://www.paramowifix.net/antenas/loop_uda_yagi/index.html
-
And a simple variant for the 2,442GHz antenna
-
A new 5,8ghz simple antenna model with patches (r + p1 + p2)
-
Efendi, the antennas can be placed around the helices ... ??
-
I think that better is galvanized or brown sheet But why do not you want to try with PCB..??
-
Thank you, but you know ,this will be and because of you...!!!
-
Yes, but it must be done in this form on PCB ,,on PCB plate....
-
Would you like that ... ??
-
How great you want it,,,???
-
For that, there is a plan on AutoCAD
-
Yes, but a lot more interesting would be with a dielectric lens,,,!!! ,,,below is an LNB for satellite reception...!!!
-
,,, on the PCB...??
-
So it should look like a vibrator unfolded,,,
-
Directional antenna BDM-1
-
Focus F=450mm...???
-
On the territory of the Russian Federation go to the following standards: GSM 900: transmit frequency 890 – 915 MHz receive frequency 935 – 960 MHz. GSM 1800: transmission frequency 1710 to 1785 MHz receive frequency 1805 – 1880 MHz.
-
For 5,8 GHz, try this,,, or this...
-
Yes, I will try to make such a similar
-
yes,try it...!!! But the antenna should be rotated with 45grade
