Welcome to WIFI Antennas
Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
Admin
Administrators-
Content count
4634 -
Joined
-
Last visited
Everything posted by Admin
-
Yes, I think you're right, try it.
-
,,, maybe this profile would be suitable for this type of antenna...
-
HailSat es-2 will first provide Geostationary Amateur radio in the range of S and X. the Transponders have wide beam antennas that provide full coverage for about one third of the earth's surface. The linear transponder will simultaneously operate up to 90 SSB stations. Digital transponder about three stations, depending on the form of a band DVB-S signal. Linear transponder S/X: Band 250 kHz SSB/CW Uplink 2400.050-2400.300 MHz RHCP (right hand circular polarization) Downlink 10489.550-10489.800 MHz LVP (linear vertical polarization) Digital transponder S/X: Band 8 MHz DVB-S Uplink 2401.500-2409.500 MHz RHCP (right hand circular polarization) Downlink 10491.000-10499.000 MHz LHP (horizontal linear polarization) This antenna it"s 10GHz linear feed horn combined with 2.4GHz circular patch for Es'hailSat2 on a parabolic dish
-
,,, another form of vibrator for Bester antenna that is better suited for MIMO...
-
,,,for which the X-polarized Batwing antenna...
-
,,, what is ... 38 * 38 * 6mm steel...???
-
,,, although this project is older, I found these dimensions...
-
Good yield an antenna that can be mounted on an offset parabola...
-
,,, yes, you can use the desired connector..!!! Yes you can...!!!
-
wifislax64-3.1 VERSION FINAL PARA DESCARGAR https://foro.seguridadwireless.net/live-wifislax/wifislax64-3-1-version-final-para-descargar/msg374111/?topicseen;PHPSESSID=d0897b0807542a05cd799b755e691906#msg374111
-
,,, congratulations doctor, but I think you need to work a little on the impedance, it should cover a wider band of frequencies...!!!
-
,,, it could be something like this ....
-
,,, yes, I think it could be ... !!!
-
Dimensions; vibrator = 129x129 mm; reflector = 168x168 mm
-
,,, it is recommended to show all dimensions...!!!
-
,, is one and the same with antenna ,,, copper sheet or galvanized sheet...!!!
-
,,,hi buddy...!!! ,,, but I think it's better that way ... !!!!
-
,,, it might work, but the isolation between ports leaves much to be desired, it must be tried ... !!!
-
-
,,, and Dr. Pepper says.... When the PDF is a scientific article I have perhaps access Edit: here it is: wong2004.pdf
-
,,, it seems that the impedance is not very good ,, okay, okay, it also shows the dimensions .... !!!!
-
,,, this is what the 0.35mm thick sheet looks like...
-
,,, I will do a simulation for PCB 1.6mm thick as well as for antenna only 0.35mm thick sheet...!!!!
-
1) No. 2) Other dimensions are required for 0.35mm copper sheet. 3)The antenna simulated by me , works just as well for the 5.0-5.5 GHz frequency range.
-
,,, that would be ... !!!!
