Welcome to WIFI Antennas
Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
-
Content count
4634 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Articles
Calendar
Blogs
Downloads
Everything posted by Admin
-
,,,hi buddy...!!! ,,, dimensions are incomplete, you can post a * CST file...!!! ,,,and that's what it is...?? "board_measure.s2p"
-
,,,,yes, but the same can be done with my connector above...!!! ,,, okay, you can make a * cst file with this connector...???
-
,,,adaptation line...
- 1 reply
-
2
-
,,, yes, I see that you are on the right track, I didn't understand what you meant before, why is not the suitable connector ... ?? ... !!!
-
,,, wrong, look at the calculation once again .... !!!!
-
,,, with this type of connector ... I adapted this Bester antenna.... And here is the connector file for those interested.... sma 5110CC.cst ,,,and BesterM Antenna... besterM.cst
-
,,,try with cst2021...!!! ,,,or maybe I'd better give you the drawing ...!!!
-
The ANTEX AX-2000 OFFSET 75 irradiator complete with an offset mirror antenna (not included) is designed to increase the range of 3G modems in the 1705-2175 MHz range . A mirror antenna with an irradiator significantly improves the quality of communication at the borders of 3G service areas. The active vibrator of the irradiator is securely hidden from precipitation and aggressive influences in a plastic case. Overall dimensions, 120x120x60mm To choose the right diameter of the "plate", refer to the following table: Antenna diameter-Resulting gain factor 0.55 m-19 dBi 0,6 m-20 dBi 0.9 m-23 dBi 1.2 m-26,5 dBi 1.5 m-28 dBi Thus, the larger the antenna diameter, the greater the gain. We recommend: use antennas of 0.55-0.9 meters, because they have a relatively small windage, use" plates " of domestic production. But you can also use any other offset antenna.
-
,,,see the cst*file(T-Antenna) above...!!!
-
I do not have the dimensions of the original antenna and the impedance can adapt to 75 Ohm.
-
,,, this antenna could be quite good... T-Antenna.cst
-
,,, by the way, maybe something like that could be used as crossed dipole...
-
,,,from Sl4va...
-
,,, maybe yes, but you need other distances between the biquad antenna..!!!
-
,,, then try to transposes this type of antenna on the frequency range 1.7-2.7 GHz...!!!
-
,,,a Bester Antenna after Harry36...
-
,,, and these dimensions are important...
-
,,,a fake batwing antenna 1700-2700, 8.7-9.7 dBi @ 50 Ohm from Yurii Pylypenko (ypylypenko) wrote... ,,, and here are my results ...
-
,,, another situation would be if SMA connectors were attached to the REFLECT0R...!!!
-
,,,only if you give me all the dimensions on the antenna....!!!
-
Harry36-user,he meant other batwings, not even batwings, but Sputnik V. Sputnik V,, put in a bucket... ,,IMAGINE...
-
Powerful budget broadband panel antenna 2G / 3G/4G / WIFI. Gain 17.5-20.0 dBi. Ra=75 ohms, MIMO. General information: The ZETA F MIMO panel antenna is designed for use in a set of equipment for wireless data transmission systems.: cellular communication (GSM1800) 2G (EDGE) 3G (UMTS 2100) 4G (WIMAX,LTE) WI-FI (IEEE 802.11b, g) and in other systems in the 1700-2700 MHz band. Electrical characteristics Operating frequency range, MHz 1700-2700 Gain in the GSM1800 range, dBi 17,5-18 3G gain (1.9-2.2 GHz), dBi18-19 WIFI gain (2.4 GHz), dBi19,5 4G (LTE) gain, dBi 19,5-20,0 Bottom width in the H-plane, deg 15-26 Bottom width in the E-plane, deg 15-26 Side lobe level, max -12 dB Cross polarization level, max -25 dB Input impedance, Ohms 75 SWR , max 1.6 Permissible power,10 W Polarisation vertical+ horizontal/ X-pol Mechanical characteristics Weight with mounting, g 2705 Bracing mast diameter 20-52 mm Overall dimensions without mounting, m 0,4 x 0,4 x 0,035 Connector 2 x F-female Material of the protective box Polycarbonate+ABS Antenna Material galvanized steel Mounting material steel Protective coating powdered polymer paint