Welcome to WIFI Antennas
Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
Admin
Administrators-
Content count
4634 -
Joined
-
Last visited
Everything posted by Admin
-
The AX-2017PF panel antenna is intended for use in a set with 3G modems (routers). The antenna type is common-mode array. It is recommended for use at the borders of service areas, when the 3G signal level is weak and unstable, as well as in the case of a long connecting cable between the modem and the antenna installation point. The AX-2017PF is a version of the AX-2017P antenna, but only for a 75 ohm cable. The antenna uses an F-female connector (a conventional TV connector with a thread), which makes it possible to make cable assemblies directly by the user without resorting to the help of specialists, without using special tools. By using a SAT703 TV cable instead of a 50 ohm cable, you can save a lot of money . Electrical characteristics Operating frequency range, MHz 1900-2200 Gain, dBi 16÷17 Bottom width in the H-plane, deg 32÷40 Bottom width in the E-plane, deg 16÷19 Side lobe level, dB max -13 Forward / backward ratio, dB not less 20 Input impedance, Ohms 75 SWR in the operating frequency range, max. 1,5 Permissible power, W 10 Polarisation vertical/horizontal Mechanical characteristics Weight with mounting, g 1800 Overall dimensions without mounting, m 0. 45x0. 24x0. 05 Connector F-female Antenna Material steel, galvanized steel Protective coating powdered polymer paint Material of the protective box Polycarbonate+ABS
-
,,, modified version with bent reflector... patch with bent line.cst
-
,,, maybe so ...
-
I think the galvanized sheet is the best...!!!!
-
,,, a constructive variant of the user "com666" ... !!!
-
-
,,, the antenna dimensions of the user "com666"....
-
,,, I think that for a good isolation between ports, such a configuration would be necessary...
-
,,, I don't know, have to try ... !!
-
untitled.bmp
-
,,,clanon,try to put the simulation in the center...!!!
-
,,, vova, try not to post so many photos,,, too many useless pictures,I will delete them...!!! ,,, the thickness of the sheet does not influence too much the characteristics of the antenna...!!!
-
,,, clanon, you can turn this into * maa file...???
-
,,, another fake antenna made by mcneill...!!!
-
,,, these could be the dimensions .. !!! ???
-
,,,okay,I will try it today...!!!
-
,,,it happens that the gain increases a little but it is about the protection against electric discharges...!!!!
-
,,, I think I can't, I have cst 2021..!!!
-
,,,swisusto,these are the files you requested.... 5,777ghz.gbr 5,777ghz.dxf ,,,and measure... 5,777ghz.cst
-
-
,,, YOU want a Batwing antenna...???
-
,,, for what frequency do you want the patch antenna to be...???
-
,,,the 50 Ohm coaxial cable is mounted directly...!!!
-
,,, these are the dimensions for the 2600 MHz frequency... ,,,and *cst simulation...
-
,,,yes...!!!
