Admin

,,, yes, it is possible, but I think we need circular polarization ... !!!

I think something like this...

DB Cantena needs to be optimized..!!!

,,,, one is a waveguide the other is a patch antenna, they differ from each other ... !!!

,,,, I don't know exactly, it needs to be checked again, the project is very old...!!!

you can make a sub-reflector with these dimensions(approx)...

,,,, and what does the vibrator look like .... ???

,,,okay buddy...!!! these are the * igs files... simplepatch1.hlg simplepatch1.igs

1400 MHz-2600 MHz, broadband circularly polarized microstrip antenna with two gap-coupled probe feeds; Dimensions ..

swarg_eu,You can design such a divider...???

Description Directional 3G / 4G LTE MIMO antenna R-Net Boom with 2 x 20 dBi gain refers to the type of directional antennas and serves to amplify and stabilize a weak mobile operator signal and increase the data transfer rate over significant distances to base stations (up to 20 km). It is most often used in rural areas. It can work in both 4G LTE and 3G UMTS networks, with the only difference that MIMO technology is supported and will work in LTE networks, but not in 3G networks. The antenna has a gain factor of 2 x 20 dBi and supports a frequency range of 1700-2170 MHz. From this it is clear that this antenna will be effective where there is 4G LTE coverage at 1800 MHz, as well as 3G at 2100 MHz. The directional 3G / 4G LTE MIMO Boom antenna is an outdoor antenna that is mounted on the roof, on a balcony, or on a wall outside the building and is directed towards the mobile operator's base station. The directional pattern of this antenna is quite narrow, so the more accurately it is oriented to the transmitting tower, the better the quality of signal reception will be. The LTE Boom antenna is attached to a vertical pipe using the attachment included in the delivery package. A 50-Ohm cable must be used to connect to a modem or router. To connect cables, there are two F-female connectors located on the back of the antenna. The recommended maximum cable length of RG58 type is no more than 20 meters. ,,, and some constructive details for antenna adaptation..

,,, this variant is also possible.... ,,, but this idea (helix + parasitic patch directors), has no advantage...

,,, yes, hinges for adjusting the inclination of the wings between 17 ---- 33 degrees...!!!!

"Yes, Julungas is an old mexican friend of mine...!!!

,,,never mind...!!!

,,, clanon, try to reduce the rotation speed in your images ... !!!

MikroTik LHG LTE6 Kit \ LDF LTE6 Kit antenna... Mobile network Category 2GClass 12 3G categoryR7 (link down 21 MB / s, link up 5.76 MB / s)/ R8 (link down 42.2 MB/ s, link up 5.76 MB / s) LTE category6 (link transmitting 300 Mbps, link sending 50 Mbps) LTE FDD bands1 (2100 MHz)/ 2 (1900 MHz)/ 3 (1800 MHz)/ 7 (2600 MHz)/ 8 (900 MHz)/ 20 (800 MHz)/ 5 (850 MHz)/ 12 (700 MHz)/ 17 (700 MHz)/ 25 (1900 MHz)/ 26 (850 MHz) LTE TDD bands38 (2600 MHz)/ 40 (2300 MHz)/ 39 (1900 MHz)/ 41n (2500 MHz) 2G commands2 (1900 MHz)/ 3 (1800 MHz)/ 5 (850 MHz)/ 8 (900 MHz) 3G bandwidth capacity1 (2100 MHz)/ 2 (1900 MHz)/ 5 (850 MHz)/ 8 (900 MHz) Set contentsLHG LTE6 Power supply unit 24 V, 0.38 A Iniektor PoE 2 metal, clamp mounting Kit K-LHG kit

,,,okay,then show the hfss*file..!!!

,,, and impedance ... ???

,,,it must be tested... !!!

,, no, no balloon is needed for the 2442 MHz frequency...!!!

Another form of copper wire antenna...by Mul_ono Chanel on YouTube