Admin

This type of antenna was developed by the "sgser" user...http://www.lan23.ru/forum/showthread.php?t=9279&page=49 The panel shows the elliptical vibratory elements which are fed by copper wire lines through a metal plate polyhedra...

,, and here is a simulation of the antenna with mine dimensions(I'll post them later)....!!!

Outdoor dual-band directional WiFi antenna works in conjunction with WiFi routers that have removable standard antennas (RP-SMA connector). The antenna housing is made of radio-transparent plastic, which protects from UV radiation and most adverse weather conditions, increasing the service life. The antenna can be mounted on a mast or bracket with a diameter of up to 50 mm. High self-amplification allows you to cover with a confident WiFi signal, for example, the yard of a country house or dacha, expanding the scope of the home WiFi network for mobile and stationary devices, wireless video surveillance cameras, etc. To connect to a WiFi router, the antenna is equipped with an RP-SMA connector. SPECIFICATIONS The location of the antenna:Outer Supported communication standards:WIFI 2.4 GHz and 5GHz (standards IEEE802. 11a / ac/b/g/n) Operating frequencies, MHz:2400..2500, 5100..6200 Gain factor, max., dBi:15/12 The standing wave ratio on voltage not more than:2 Wave resistance, Ohms:50 Maximum input power, W:40 Cable length, m:5 Connector type:RP-SMA Built-in Wi-Fi adapter:no Overall dimensions (without mounting unit), mm:240x240x85 Weight, not more than, kg:1

Solwise Outdoor directional panel antenna 10dBi gain Flush wall mount N type socket connector 2.4GHz

A horn antenna is one of the most commonly used antenna types for a focused antenna. However, the horn antenna is limited by its dimensions, which must have a certain size relative to the wavelength in order to work properly and efficiently. Since this will typically be too large to fit into the flange, a dielectric lens antenna with reduced dimensions is developed. The lens has the spherical form which is able to enhance the gain by making use of guided surface waves. The antenna is fed by a circular waveguide and at the boundary of the dielectric half space. A stepped impedance transformer has been introduced in order to provide broadband input matching impedance.

Petra-9 turns into Petra-20 For the manufacture of a strong UMTS 2100 antenna, which it needed in a repeater gain circuit, must be used a small Antrax Petra-9 panel antenna. Petra-9 is used as a service (internal) antenna, but with a little refinement it can become an irradiator for an offset mirror.

,,,for tuning the 50 Ohm impedance,Total Efficiency must to be << -0,06 dB...!!!

I think I should test this mini-TV antenna...!!! ,,.from JM actualidades on YouTube...!!

,, another form of batwing antenna... batwing new.cst it can be shaped from liver pate caps(95mm-diameter)

,,,,a practical way to build this antenna...

,,,,ok, but these dimensions are not for the 430 MHz frequency ... !!!

,,,,it works in 2.4 --- 2.6 GHz....!!!

,,, well, this antenna panel is good,,,!!! ,,,but it seems that, this antenna exists on this forum....!!! ,,, these are the real dimensions ...

,,, for which the frequency...???

,,,please discuss in English ,,, in fact I will delete the dialogue in another language...!!!

,,, here is a simple and easy to make antenna, 16 dBi gain directivity,,,

,,,it works...!!! ,,,the patches are not isolated..!!!

Reflector 190x150mm on 2400 MHz but try to recalculate under 4G iota 2600, then replace the patches on the ellipse and see what happens, well, for the kit I will do and for 3G 1900-2200, if I suddenly buy According to the patch calculator dimensions 51. 2x38. 9 on 2600 and 200 ohm, 5mm-h (air) 45.2x38.9 2600-200-10(air) 48.8x38.8 2600-200-7(air) 44. 6x39 2600-200-7 (foam with a permittivity of 1.25)

Nitsa-5 MIMO 2x2 - Antenna LTE800/GSM900/GSM1800/LTE1800/UMTS900/UMTS2100/WiFi/LTE2600 The first universal remote antenna NITSA-5 MIMO 2x2 with LTE-A support (up to 300 MB/s). The NITSA-5 MIMO 2x2 antenna is designed for use with cellular phones, modems or repeaters.: 2G(EDGE, GPRS, at frequencies of GSM900, GSM1800) 3G (UMTS2100, UMTS900) 4G (WIMAX,LTE800, LTE1800, LTE2600) WI-FI (IEEE 802.11b, g, n) Electric characteristic Operating frequency range, 790÷960/1700÷-2700 MHz Gain, 2x9. 0÷9.5/2x10. 0÷14.5 dBi Bottom width in the H-plane, deg 69/36÷69 Bottom width in the E-plane, deg 65/37÷53 Forward / reverse ratio, dB at least 18 Side lobe level, dB no more than -13 Input resistance, 50 Ohms SWR in the operating frequency range, no more than 1,6 Permissible power, 10 W Polarization vertical+horizontal/X-pol Mechanical characteristics Weight with mounting, 1980 G Overall dimensions, 0, 24x0, 45x0, 08 m Connectors 2 × -female The material of the radiator galvanized steel Protective box material Polycarbonate+ABS

The company's latest optimization...dual band(2,4 GHz;5GHz) antenna by REMO ELECTRONICS Technical specifications Built-in Wi-Fi Adapter No Cable length, m 5 Voltage SWR, not more than 2 Package weight, kg 1,2 Supported 2.4 GHz and 5 GHz WIFI communication standards(IEEE802.11a/ac/b/g/n standards) Operating frequencies, MHz 2400-2500, 5100-6200 Assembled dimensions, mm 240x240x85 Antenna placement is external Gain, max., dBi 15/12 Wave resistance, Ohms 50 Connector type RP-SMA-plug Weight, kg 1

-quotes in blue = 1800MHz -quotes in red = 2400MHz

REMO 2500-5000 mhZ

DeepBlueSea,, it is not necessary to post my images in duplicate...!! I will delete these...!!!

After a russian model