Admin

,,,changing the thickness of the material, does not have much influence on the antenna characteristics...!!! I do not have this file anymore, I should resume this type of antenna...!!!

,,,another form of feeding patch...

There are two types of antennas, RHCP, and the LHCP. Don’t be overwhelmed, it’s easy, we’ve outlined the basics below. RHCP antennas are known in full as Right Hand Circular Polarized antennas. LHCP antennas are known in full as Left Hand Circular Polarized antennas. Sometimes, they are both known simply as Circular Polarized (CP) antennas. Due to its polarized nature, this type of antenna will reduce any radio interference by a process known as multipathing. This blocks out unwanted radio signals and can give a much cleaner signal. For which below I was looking to do a simulation of the antenna after the Iulian Rosu site ... ??? https://qsl.net/va3iul/Antenna/Printed_and_Microstrip_Antennas/Design_Ideas_for_Printed_and_Microstrip_Antennas.htm

,,,frequency band 2.4 ... 2.7GHz...!!! ,,,if the antenna is overturned and will have 7 elements then it will be easier to build...!!!

,,,another practical achievement...

,,,for this antenna, if there is put two directors again, you get a good one...!!!

This is for geostationary satellites ... ???

another antenna 4 years ago ... ???

I do not know, I do not remember, this type of antenna is my oldest simulation of several years ago...!!! I still think the PCB is 250x250mm. ,,,but I will resume this simulation with leaky-wave antenna...!!!

,,,so you like it ...???

,,,and another....http://www.lan23.ru/forum/showthread.php?t=9261

,,,why the antenna more exposed another old antenna ... ??? ,,,from...http://www.lan23.ru/forum/showthread.php?t=9002

"after this simulation, I will try to improve and the 10GHz frequency...

Helper site for those who want to know more...https://uhf-satcom.com/blog/patch_antenna and other constructive variants...

,,,, this antenna is long ago and I do not have the file yet, but it can be restored with improvements....!!!

"after this simulation, I will try the above variant...

Try and see....!!!

,,, how this connection should look like... ,,,you have to untie this ... and get it over....!!!!

,,,well, thank you...!!! ,,,,yes, we have been the holy pastas, now they have passed...!!!!

Yes, a few years ago I simulated this with a conical vibratory element as below...

,,,yes, very good, but be careful that the coaxial cable must pass through the back of the reflector...!!1

,,,,and generally, this antenna is better .... ??

clan, do not do that...!!1 ,,,make this...

"why do you want, to build one ... ???