Welcome to WIFI Antennas
Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
Admin
Administrators-
Content count
4764 -
Joined
-
Last visited
Everything posted by Admin
-
And how do you want to do this?
-
I think this one...
-
,,,yes dear tcl32...!!!
-
I wrote to you above that the antenna has a 240-300 ohm impedance, so you need to adapt for a 75 ohm cable. ,,,something like that...
-
The impedance is highly dependent on the construction details. In general, you can expect 100-400 ohms of impedance. The nominal impedance is generally considered to be 400 ohms.
-
1) 240---300 Ohm 2) ,,,no...!!!
-
,,,the antenna according to E. Spindler....470 - 790 MHz
-
And yet, this antenna is not really good ...
-
No, the drawing is very good...!!!! I'm going to make a simulation on this antenna.
-
,,, good, put the dimensions if you can ... !!!
-
StationBox 5 GHz 20 dBi SISO....
-
,,,for another form of antenna ... ???
-
-
The SMA port has this configuration...??? and this is for simulation... SMA mic.cst
-
,,,yes, this panel antenna is very good and is broadband....!!!
-
,,,another achievement of com666 user...
-
And here's a solution for the Wi-Fi Uda-Yagi antenna...
-
,,,then install cst2019...!!! "but I do not think you can not open with cst2016 ,,,, !!! is 64 or 32 bit ... ??? must be on 64bit...!!!
-
Yes, that's the best one... simplepatch1.cst
-
simplepatch1.cst
-
-
Yes, you are right, but this can be adjusted via the feed pin diameter(Dpin) and the distance "h"...!!! ,,,but anyway the antenna is in the study to be MiMo ....!!!
-
",,,, so it should look like a real optimization....!!!! ,,,and these are the dimensions...!!!
-
Oh, okay, Andrew is a good guy but if he could do both program simulations and optimizations would be even better,not only checking with the spectrometer is enough...!!!! The dimensions of my antennas above are given by me and are not copied according to the original model...!!1
-
,,,hi buddy....!!! ,,,and how it works this installation .. ??
