vova.gumerov

Thanks! Jomi. I will do it!

Нужно освоить прогр. Мнаму! You need to master the program. MMANA!

Hello Jomi! I have yagi calculators. But this is a narrow strip. I did it on the middle frequency - not very good!

600-700мм

oh it's a long antenna !!!!! I thought that you already calculated the antenna for me and that for 12dbi you need to add + 3 elements ??? Clanon, for one good small antenna, they will give 2 long ones !!!!

Thank you very much, Clanon, for your work! Add as many elements as needed. Then I will use without an amplifier. A dipole made in this way is very good from reactivity

better with one! I thought so! Clanon, they brought me an AL strip today. 15x2mm. This is in addition to the material I wrote to you yesterday!

It is necessary to overlap 2 channels 706 and 754 MHz 10 items will be ok. Reflector is the same Noise immunity is very important

colleague, Clanon, at one time I made a lot of dipole antennas, which are still with friends. Yes, simple and reliable !! On radio sites, there is a lot of controversy and discussion about Spindler's antenna. I still have this one counted at 2600, it works great !!! So I thought to do it for TV, but I would like to optimize !! There is an AL tube. 8 10 and 12mm. Boom - round 20mm 25mm and 18mm Square 15x15

91-Nw-03-Anteny_cz-3.pdf

There is a PDF file at home. By the way, Jomi, it is on the internet with a breakdown of sizes by channel! If you optimize then 10 email. option! Like this

Hello Jomi! You probably forgot about me? Yes, it is clear that there is not enough time for everyone! I wanted to ask. Did you try to simulate Spindler's Yagi antenna, because you did Kappa! These are all antennas from the times of the USSR and were made according to GOST. By the way, the Kappa plant is still operating in my city. And according to Shpindler, I'm certainly interested in my range 690-770 Interestingly, before there were no devices or programs !!!!!!! ... Sorry in Russian.

Yes Kappa is not a bad antenna, but it is broadband! But I would like to make a real antenna, designed according to the program for my range and from my own materials! You can make a mouthguard, but it's problematic !!!!

hello Jomi. How are you and your health? Sorry to write in Russian, it's more convenient for me to express it! I have a big request for you! You can calculate the Yagi antenna for 690-770 MHz. If you do, then I will write what materials there are. Thank you in advance!

Greetings, Jomi! I have a question. The Yagi antenna is designed for a 25mm boom, if I make it out of a 15mm boom, will the parameters change a lot or do I need to recalculate it? ,,, vova, don't post duplicate images anymore...!!!

Приветствую тебя, Джоми! У меня есть вопрос. Антенна вроде "Лир", но как правильно рассчитать 2 восьмерки, учитывая толщину и ширину полосы? Конечно, я знаю основные формулы, но мне нужна оптимизированная, на частоте 730 МГц. Greetings, Jomi! I have a question. An antenna like "Lear", but how to calculate 2 eights correctly, taking into account the thickness and width of the strip? Of course, I know the basic formulas, but I need an optimized one, at 730 MHz.

ok

Greetings, jomi. We had such a dispute about which antenna is better to make, aluminum or copper. I would like to know your opinion!

приветствую тебя Джоми. Не могу найти оцинковку на 1мм, есть 0,9 латунь. Сильно изменятся параметры или нужно пересчитывать все размеры? Извини, что на русском, пишу с телефона. I greet you Jomi. Can't find 1mm galvanized, there is 0.9 brass. Will the parameters change significantly or do you need to recalculate all the sizes? Sorry that in Russian, I am writing from the phone.

Jomi dear, I almost finished the antenna from the first drawing !!!!!!!!!!!!! Now do it again !!!!!!

Thank you friend. Question. Is it a connector in red or can it be directly with a cable?

I'm interested in the transition from 300Ohm to 50Ohm. But if there are sizes at 2600, I'll do it !!!!!!!!!!!!

Greetings, jomi. You will not show what you did, very interesting! And the main thing is agreement!

I write in English, and the computer automatically recks into Russian, you need to figure it out !!!