Welcome to WIFI Antennas
Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
bejonet
Members-
Content count
185 -
Joined
-
Last visited
Everything posted by bejonet
-
definitely using very thick material, and the size must also be large
-
-
wow... it is big antenna.. possibility of problems with wind gusts
-
hi admin... it is posible to copy mantbox reflector for this sector antenna???, mimo with single polarization of course..
-
Correction, i use 0.4mm galvanis sheet not 4mm and today i adding reflector, indoor place, get 21 tv channel 19 clear picture. Thank,s admin...
-
No,,,, use director but without reflektor. Without director is it not working, maybe tomorrow i try attach the reflector
-
antenna test without reflector i get 3 digital tv broadcast (same as biquad i use before) 17 analog tv broadcast, but more clear picture than my old wire biquad, some bad signal for uhf 22-28 and uhf 52-60, maybe there are another option for 300mhz bandwith? Thanks,,
-
-
use galvani sheet 4mm, how to connect the coax cable, i dont have flux for solder galvanis or maybe use bolt and nut, and pixelglass replaced with styrofoam it would be?
-
dimension and material for this antenna please,,,
-
yes, i was tested and it working very good, i like it what polarization and angle beamwidth for this antenna? if add more patch, can be increase the gain?
-
for the feed, whether it is right on the edge or there is a distance from the edge
-
the antenna is finished, can it use the teflon sheet to cover it?
-
ok, I will try this antenna, can you give me a detail please,,,
-
how about this,,,
-
thanks, but not as I expected, digital tv (maybe 5-6) works at a frequency of 400-500 and most tv broadcasts are in the frequency of 470-799mhz. that means for fbiquad antenna it is not possible to work at 400-800 frequencies?
-
this one, please,,,
-
ok,, how to connect director and what material using between director and wire.
-
chances are less precision, because cutting by scissors,,, just make the reflector it is possible for mimo???
-
thank you, will remain faithful to wait for the results of the details
-
good thank you,, but it is for 1800mhz, that i need is 2300-2700mhz
-
and where i found the detail...?
-
if I'm not wrong
-
this one?? but with eight patch right... I think not easy to find wire with 1,6 size, if i change the wire size to 1.5 or 2 mm. is there a change in antenna measurement, maybe the distance between the patch and the reflector, or the size of the patch or other? or do you have to still use the wire size to get best results?
-
maybe you can tried amos for antenna with wire element, it is good and simple to made...
