Welcome to WIFI Antennas
Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
bejonet
Members-
Content count
185 -
Joined
-
Last visited
Everything posted by bejonet
-
good... thank you Admin, i was have to made it, next i will try to changed with copper wire..
-
i mean this, whether using wire or cooper plate? because it is hard to cut cooper plate that size
-
hi admin... can be this sma connector changed with this way..
-
how about potential line replaced with 1.5mm copper wire..??
-
is it possible?
-
thanks for correction and yes it work, this patch more signal strength than my omni antenna 10db..
-
I thought the length of the director and vibrator were the same, meaning the director was longer than the vibrator right? thanks brother.. another question .. what about models like this, for the 2400mhz sectoral antenna, is it possible?
-
the length of the director and vibrator is 56mm, while the nut distance from the long side is 30mm, so the nut is not in the center ?? that's what I meant I tried using a comparison of tplink wr-741nd with default omni and this antenna, the result is still better using omni
-
i thinking if measurement 30mm from director and vibrator not from reflector and i use reflector size is 80x100mm
-
my mistake have look at the picture, nut not to the center vibrator and director
-
what material do you use and how thick
-
this is without sma connector, can it be applied? for 2,4ghz
-
where is coax cable or feeder/connector
-
great, coz there are some easy to made, no need special tools
-
thats radiator using cooper wire?
-
which better with this one..
-
what used material?? can you tell me about this detail, its look like easy to made. thanks
-
in english please,,
-
the other size is same as yours, except sma conn (replace with coax cable) dan material from tin can 0.5mm
-
i have made it, perhaps give more wireless range, not yet test
-
material from tin can 0.5mm, feed from coax cable
-
how about decrease a reflector, for fitting my outdoor box size 100x160mm
-
May i see your homemade collinear antenna?
-
hello brother how are you, long time to see i would try to make like this, what do you thinking
-
it is suitable for 2.4ghz wifi router or just for drone?
