Welcome to WIFI Antennas
Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
.jpg.e487a2e14e625566e5c363caa772bdae.jpg)
pragata.my.id
Members-
Content count
118 -
Joined
-
Last visited
Everything posted by pragata.my.id
-
are these three elements connected to the nut?
-
You are a very smart person, sir.
-
can it be repaired again, for 2422 mhz and the addition of the cup
-
thank master, for this suggestion. or may also need additional reflectors in front of it?
-
please help me, use whatever construction is up to admin father, to achieve maximum performance of this antenna model, yesterday i only use the same copper wire with spiral.
-
wear the same copper wire.
-
which is correct according to the theory that I can on the internet between the 2 wire is connected, but why in fact, better separated? positive and negative poles. like this.
-
diameter wire = 2mm diameter spiral = 44-46mm
-
length of spiral wire I use 4 x lamda = 4 x 123,86 = 495,44mm. the distance between the spiral with the reflector is about 35mm.
-
can you tell me the detail construction of this antenna?
-
wear the same copper wire.
-
because of the limitations of measuring devices, I only use "signal quality" information on the router asus rt-n10u ddwrt. I call this antenna "capucino" because of its coffee-like shape in a glass. from the experimental results I made, (C-3) is best in my opinion, that is, in series, the middle connecting point. because of the complexity of making it, i left the project behind.
-
my first imagination
-
amazing
-
I mean so, but the construction is made 1 row instead of 2 rows.
-
I am also waiting for this.
-
can my brother tell me the detail construction, the shape is long, the width of the reflector is about 100mm, the gain is about 16-20dbi, the frequency is 2422Mhz.
-
for detail explanation US20130321214.pdf
-
-
-
can you make the right size so that the gain is large, the point is I want to layout antenna like this, shaped length and width about 100mm, so I can put in pvc pipe. my low-powered laptop can not install antenna modeling software like CST, magus ,.
-
sorry, that's a greeting language in my country. Javanese language. saking pundi mbah? = from where sir? salam kenal njeh = Nice to meet you kulo saking lampung = i am from Lampung
-
bejo lan suloyo ... hahaha .. saking pundi mbah? salam kenal njeh .. kulo saking lampung ...
-
When the distance between the patches is far away, the dimensions will be smaller, this is usually used for close proximity to wider radiation.
-
I mean spacer = the distance between the patches. the length of the impedance 50ohm, i hope to focus on frequency 2.422 Mhz.
