Welcome to WIFI Antennas
Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
lrg
Members-
Content count
103 -
Joined
-
Last visited
Everything posted by lrg
-
это антенны вай- фай на 2.4 . почему они находятся здесь? они должны находиться в группе вай-фай. this is a Wi-fi antenna on 2.4. why are they here? they must be in the wy-fay group.
-
-
OK . understandably . please delete this topic.
-
there's no need. prsche people find galvanized sheet 0.5
-
the thickness of the metal 1mm ?
-
square also powered curve
-
square sealing is also a curve. from one angle 8 mm with another 9mm.
-
Yes you are right, tried on the first size in the corners diagonally, there's a helicopter which from one side 4mm the other 5.3 on the second size of the dispersion was measured at the corners of a diagonal of 7 and 8 mm So I unfortunately spoil the work of the developers Krivorukov collectors.
-
Check it out in the program . the reflector 2 nuts, then the 3 nuts. the height of the nut 2.4 mm
-
Not much kick, took off as I could First size the reflector 4mm, 6mm second.
-
very crooked tight. need to modify the program.
-
check it in the program . under the first patch the 2 nuts, then the 3 nuts. Just the height of the nut 2.4 mm
-
-
-
15.3mm center of the bolts.
-
I am also very interested in it
-
it's inside the box
-
photographed 75 Ohm and not 50 Ohm
-
-
I kazhitsya that with the second port problem
-
-
-
-
absolutely count on 75 Ohm
-
a remarkable convert it to 75 ohms
