lrg

1 hour ago, Admin said:

I think Chilanzar could inform you best...!!!

" it might be 0.5mm...!!!

Chilanzar? Where can I find it?

so says the developer https://kroks.ru/shop/antenny-gsm-3g-4g-wifi/panel-antenna-3g-18-db-kp18-2050-modem/

37 minutes ago, lrg said:

Sorry I hurried and did not even ask about the thickness of the metal patches in this irradiator

What is the thickness of the metal used in this feed?

On 19.06.2018 at 2:26 PM, Admin said:

,,,well Irg, but for which frequency do you want...!!!

Sorry I hurried and did not even ask about the thickness of the metal patches in this irradiator

I can't. I don't have this antenna.

Yes

Kroks AP-221M1-Pot - is router with 4G mPCI modem and the 9 dB antenna built into a housing designed for installation on the street.

Advantages over traditional solutions:

The device already contains 4 components, which is usually purchased separately: antenna, microwave path from the antenna to the modem and the router.

mPCI modem allows you to get the maximum possible speed 4G Internet that may not always provide a normal USB modem

Due to the fact that the antenna and modem installed as close as possible to each other, the loss of the microwave cable is minimized.

Easy to install. For mounting the device it is necessary to lay only one cable is twisted pair, which is much easier, faster, and cheaper, than to lay two microwave coaxial cable.

To power the router does not need to mount a separate cable, as the power is on twisted pair. The power injector is already included in the delivery set of the device.

Inside the device is mini-PCI modem Huawei ME909s-120.

The router has one LAN port is 100 Mbps.

Key benefits:

compact size

supply voltage 9 to 24 Volts

Operating frequencies:

2G - EDGE/GPRS/GSM 1900/1800/900/850 MHz

3G DC-HSPA+/HSPA+/HSPA/WCDMA B1/B2/B5/B8

4G - LTE (FDD) B1/B2/B3/B5/B7/B8/B20

Data transfer rate:

4G - up to 100 Mbit/sec (input) / 50 Mbps (Exodus)

3G - up to 43.2 Mbps / 5.76 Mbps (Exodus)

Ports and interfaces:

Ports Ethernet, 1 PC, 100 Mbit/s

SIM reader

Main features:

128 MB Ram

Rom 32 MB

The power of the transmitter modem +23 ... +33 dBm

CPU 600 Mhz

Power 9~24 V, not more than 10 watts.

9 hours ago, babak_p said:

Thanks for you

Do you have the size and dimensions of this Antenna and the texts of Antenna?

 

what's your distance to the base station? in my opinion, the worst option would be an irradiator and a working mirror.

Thank you so much. it's an important frequency for me.I have already started manufacturing          : -) .in General, it would be interesting to know the size of the irradiator at 2.6 MHz

17 hours ago, Admin said:

,,,well Irg, but for which frequency do you want...!!!

In this topic of course same on 2600 MHz . and it would be very smart for two frequencies of 2600 and 1800 MHz.under the 75 Ohm cable

On 18.06.2018 at 9:12 AM, Admin said:

Irg, I do not have the original size, but I will try ... !!!

 

Thanks. I will be grateful for the exact dimensions of the irradiator. I would like to try it at work.

On 6/9/2018 at 0:26 PM, Admin said:

Irradiator AX-2600 OFFSET  2x2 MIMO in the set with offset mirror antenna (not included) 

I want to make this irradiator in iron. Can the size of this radiator. Thanks

it would be very chic to transfer it to 75 Ohm cable

why not advise?

this is a feed for offset parabolic antenna

это  антенны вай- фай на 2.4  . почему они находятся здесь?  они должны находиться в группе вай-фай.

this is a Wi-fi antenna on 2.4. why are they here? they must be in the wy-fay group.

OK . understandably . please delete this topic.

For those who have hand sharpened correctly, sgser(c site Lan23.RU) and manufacturer-SPE Anteks represent the simplified version MMO feed 1900-2200 MHz, I remind you that the development is protected by patent RU117484. Drawings pulled from the HFSS file our forumchanin Over146%, for which separate him thanks. The first drawing-material thickness 1 mm, II 0.5 mm. For those who do not need the MIMO mode, it is possible to make only one port, any leave (with a strip of the features better, but to make it hard) This radiator has never been done in hardware, someone has a chance to become the first. Good luck!