Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
-
Content count
103 -
Joined
-
Last visited
Posts posted by lrg
-
-
the thickness of the metal 1mm ?
-
square also powered curve
-
square sealing is also a curve. from one angle 8 mm with another 9mm.
1 person likes this -
Yes you are right, tried on the first size in the corners diagonally, there's a helicopter which from one side 4mm the other 5.3 on the second size of the dispersion was measured at the corners of a diagonal of 7 and 8 mm So I unfortunately spoil the work of the developers Krivorukov collectors.
1 person likes this -
Check it out in the program . the reflector 2 nuts, then the 3 nuts. the height of the nut 2.4 mm
-
Not much kick, took off as I could First size the reflector 4mm, 6mm second.
-
very crooked tight. need to modify the program.
-
check it in the program . under the first patch the 2 nuts, then the 3 nuts. Just the height of the nut 2.4 mm
-
-
-
15.3mm center of the bolts.
1 person likes this -
AX-2600 OFFSET 75 Ohm MIMO 2x2 offset irradiator 4G.
Operating frequency range, MHz 2500-2700Own gain, dBi 9-10
the Resulting gain and beamwidth at-3dB level at different diameters offset parabolic antenna (at a frequency of 2000МГц)
0.55 m 21dBi .
0.6 m 22dBi .
0.9 m 25dBi .
1.3 m 29dBi .
1.5 m 30dBi.1 person likes this -
I am also very interested in it
-
-
-
-
I kazhitsya that with the second port problem
-
-
-
-
absolutely count on 75 Ohm
-
a remarkable convert it to 75 ohms
-
and more . dimensions for fabrication in metal
-
the size of what?
in Antennas for mobile communications
Posted
there's no need. prsche people find galvanized sheet 0.5