Panel antenna 12dBi

[bejonet 58]

my simulation antenna, it is will work or not?

Spoiler

 

Spoiler

 

 

 

Spoiler

 

[Admin 2545]

,,, put the dimensions ... !!!

and this is Eric's picture...

[bejonet 58]

and this is the dimension

[Eric 7]

[Admin 2545]

This is an achievement of my Mexican friend, Julungas...

[Hamza 43]

i think when the diameter 65.3 mm is better

 

[Admin 2545]

7 hours ago, Hamza said:

i think when the diameter 65.3 mm is better

 

,,,it must be tested... !!!

[Hamza 43]

[Hamza 43]

[Admin 2545]

,,, and impedance ... ???

[Hamza 43]

[Admin 2545]

,,,okay,then show the hfss*file..!!!

[Hamza 43]

Sorry monsieur Jomy that's what I found on the site . 

[Admin 2545]

37 minutes ago, Hamza said:

Sorry monsieur Jomy that's what I found on the site . 

,,,never mind...!!!

[Hamza 43]

My hand made according to your friend julungaz

[Admin 2545]

"Yes, Julungas is an old mexican friend of mine...!!!

[Hamza 43]

It's working wonderfully.

[clanon 246]

1 hour ago, Hamza said:

My hand made according to your friend julungaz

you could put HINGES on the wings sides) for transportation...(make it portable)

[Admin 2545]

,,, yes, hinges for adjusting the inclination of the wings between 17 ---- 33 degrees...!!!!

[Hamza 43]

50 minutes ago, Admin said:

,,, yes, hinges for adjusting the inclination of the wings between 17 ---- 33 degrees...!!!!

Yes 107 degree is the best   it took 1hours and half  to finish it   .thankfully I had already  2 disks 64.2 mm diameter. I got 57 % signal  with double biquad and 83 % signal with this Julungaz antenna. It's worth to Make.

[Admin 2545]

[clanon 246]

1 hour ago, Hamza said:

.I got 57 % signal  with double biquad and 83 % signal with this Julungaz antenna. 

so it's about 6 db more...(26% difference)

[Hamza 43]

30 minutes ago, clanon said:

so it's about 6 db more...(26% difference)

Yes  16 DBI estimated ...

[Hamza 43]

1 hour ago, Admin said:

Great

32 minutes ago, clanon said:

so it's about 6 db more...(26% difference)

Yes  16 DBI estimated ...

[marcosled86 2]

On 8/23/2019 at 10:56 PM, Admin said:

This is an achievement of my Mexican friend, Julungas..

Can i make it with 0.5 galvanic sheet?