DIY Satellite dish conversion use Kathrein antenna to my prepaid wifi

[Mr Ramos 5]

Good day ,, let me share my conversion satellite dish use by Kathrein antenna

I just modify LNB from satellite dish then I use aluminum puto mold 3inch and acrylic round plate 3 inch and put epoxy steel 

I don't have a DIY tutorial

But it very easy to modify the LNB 

Here my video results

But i use tagalog in my video  :-) 

Visit my YouTube link  

Testing if the signal reflect into Kathrein antenna LNB 

Now speed test 

 

 

 

Edited December 2, 2021 by Mr Ramos

[Harry36 140]

I think the reflector is a little small for this irradiator, I would pick up a reflector with a diameter of 120-140 mm in diameter, also reducing the sides to 0.5-1 cm. and in the last photo you can see that the emitter touches the reflector, which should not be

[clanon 246]

The DIAMETER of the container ...is too small (dipoles are leaning-contact with container) apparently...(Which would give a jumping signal as it is seen , high and low swr , s11, impedance and changing diagram of radiation)

Edited December 2, 2021 by clanon

[Admin 2545]

,,, it seems that this Kathrein antenna is for sale...https://www.youtube.com/results?search_query=antenna+kathrein

[Mr Ramos 5]

6 hours ago, clanon said:

The DIAMETER of the container ...is too small (dipoles are leaning-contact with container) apparently...(Which would give a jumping signal as it is seen , high and low swr , s11, impedance and changing diagram of radiation)

yup your right maybe i will search aluminum round as 3.5 or even 4 inch 

Any suggestion ? 

[Mr Ramos 5]

i am beginner and i just expore about this Kathrein antenna 
Thanks to all your suggestions and share your idea i will follow it ,, i see new aluminum 4x3 pan i try this one

But it seems pretty work in that 3 inch , just a little improvement 

but the main problem here in philippine telco broadband is not stable network  ,, some times UP,, some times DOWN
then i check it here https://downdetector.ph/ 

also i have another kathrein to try this one on picture 

[clanon 246]

SQUARE works too (aluminum plate RIVETED)...leave at least 1 cm to dipole borders...(my GUESS)

[Mr Ramos 5]

10 minutes ago, clanon said:

SQUARE works too (aluminum plate RIVETED)...leave at least 1 cm to dipole borders...(my GUESS)

Thank you sir 

[clanon 246]

 

[Mr Ramos 5]

Final Lnb Modify
Aluminum pan 4 inch and 4.3 inch acrylic round plate

next to try God willing is model E

here my final re test on my youtube 
https://www.youtube.com/watch?v=VNKRdpH60pQ