New Butterfly Antenna

[Admin 2545]

Recently,a new antenna configuration known as  Bow Tie Antenna (BTA) or Butterfly Antenna(BFA) are proposed with broadband and high gain properties . The Butterfly Antenna is shaped from four side  quadrilateral sheet feed in the vertex. This kind of antenna is defined by quadrilateral the  flare angle only. 

[Admin 2545]

,,,for the antenna panel ... ???

 

[bejonet 58]

[Admin 2545]

Wow, congratulations ... !! 1
and how does it work ...... ??

[bejonet 58]

Is there something wrong with my design, I use PVC that is given glue between the patch and the reflector? but this works well, a little better than the "simple antenna" that I have made

[Admin 2545]

,,,yes, it is good that you put insulators, I will see how it goes with the galvanic link between the patch and the reflector...!!1

[Admin 2545]

 ,,,patch suspension by 3mm conductor ...

 

[bejonet 58]

I changed the design, is it correct??

but why yours VSWR working on frequency 2,519 ghz

[Admin 2545]

,,,for the galvanic antenna, I tried to keep the initial dimensions of the patch ... ???
and further, has a frequency range of 2.4, ---- 2.65 GHz

[bejonet 58]

so,, that means this antenna can still work at a frequency of 2.4ghz ??

[Admin 2545]

,,,yes...!!!

 

[Admin 2545]

And this is my oldest idea....

,,,here it started....http://www.lan23.ru/forum/showthread.php?t=9002

[bejonet 58]

and finally,,, this antenna pair with my outdoor modified TP-Link MR3220 ubnt bullet m2 firmware installed 

[Admin 2545]

,,,hi buddy....!!!

,,,and how  it works  this installation .. ??
 

[erossutrisno 11]

On 5/12/2019 at 6:20 PM, bejonet said:

Will this work on FR4?

[Admin 2545]

,,,, no, not with these dimensions ... !!!

,,, here is an example ...

 

[erossutrisno 11]

thank you sir!

[erossutrisno 11]

Since I didn't have 150x200mm fr4, I made this with 100x200mm fr4, and it still working good

[alhaba.production 7]

can it cover LTE band? ex: 1800Mhz & 2100 ? whats need to change? 

[Admin 2545]

,,, yes, I think it could be with small corrections...

[alhaba.production 7]

any details, thannks for youre advice sir, GBU

 

[Admin 2545]

,,, these would be the required details ... !!!

[alhaba.production 7]

Thanks Sir

[Dedewe 1]

this one...???

[Admin 2545]

,,,54,9mm...!!!